![]() To avoid having this feature activate, a user should simply trigger an entry/exit zone after setting their system to Arm Away. With Auto-Stay Arming, if you don't activate an entry/exit zone, then the system will assume that you haven't left the property, and it will revert to Arm Stay. This is called Auto-Stay Arming, and it is a common feature found on many alarm systems. Some users may find that their system enters Arm Stay mode when they meant to put it in Arm Away mode. However, an alarm can still occur if someone activates an entry/exit or a perimeter zone. ![]() This way, the user can move freely throughout the building without having to worry about alarms caused by activating contacts or motions. Instead, only entry/exit and perimeter sensors will be active. In this mode, interior sensors will remain inactive. In most cases, Arm Stay is the best arming setting to use if a user is staying inside building, but there should also be nobody coming or going at that time. Two common sensor types to set as Interior include door and window contacts and motion detecting sensors.Īrm Away should not be confused with Arm Stay. If an interior zone is faulted while the system is armed away, it can be assumed that someone has broken into the property, and an immediate alarm will occur. This is because the Arm Away setting assumes that nobody should be inside the property. When a system is set to Arm Away, its interior zones will become active. You can also set your system to Arm Away using either the Total Connect 2.0 service or a security key fob. The process for doing this depends on the type of panel that is being used. You can set your Honeywell Alarm System when you leave the house by activating Arm Away mode on the panel.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |